Vacuum oven T ambient from +5°C to +200°C; from 50L to 130L
- Temperature range Tambient + 5°C ÷ 200°C
- Simple microprocessor controller with an LCD display
- Optional settings of 10 different automatic programmes and optional manual control
- A selection of an optional temperature 'steps' in each programme from 1 to 10
- Operation delay of the vacuum pump (possible to set the pre-heating first and then the vacuumization or reverse)
- Start-up operation delay (start-up at a specified time and day)
- Subject temperature display
- Vacuum analogue display
- Display and temperature setting resolution 0.1°C
- Temperature stability ±0.1°C
- Programme for a simple temperature calibration
- RS 232 communication port (printer or PC)
- Needle valve for inlet of the inert gas (venting or inlet of the gas when the procedure is completed)
- Additional reserve plug NW-40 (for calibrations)
- Observation glass with an additional protective glass
- Safety thermostat
- Two-stage silicon seal
- The interior casing is made of stainless steel AISI 304 (optional AISI 316)
- The exterior is made of aluminized sheet, powder coated (RAL 7035) (optional AISI 304)
- Shelf temperature display (SC label at the end of the type)
- Heated shelves (SC label at the end of the type )
- Vacuum control and vacuum digital display (SC label at the end of the type)
| Type | Volume | Internal size (HxDxW) mm | External size (HxDxW) mm | Power supply & wattage |
| WVO-50C | 25 L | 405 x 340 x 370 | 730 x 510 x 510 | 230V~50/60Hz 1,52KW |
| WVO-50SC | 50 L | 405 x 340 x 370 | 730 x 510 x 510 | 230V~50/60Hz 1,92KW |
| WVO-130SC | 130 L | 495 x 495 x 530 | 675 x 850 x 730 | 230V~50/60Hz 3,2KW |
Option :
- Oil vacuum pump
- Chemical resistant membrane vacuum pump (oil free)