Automated programming system AP 760

Features

• Universal automatic programmer of IC components
• Proprietary 4-nozzle gantry for handling 4 devices at each programming cycle
• Up to 9 (4 sockets x 9 sites) programming sockets
• Throughput up to 2400 units per hour
• H9800 Universal Programmers with 16 Gbits of RAM on each programmer
• Insertion alignment for pick-up offset by “Precisor” or dual CCD cameras
• I/O : plateaux JEDEC / Barettes /Bobines
• Device support: EPROM, EEPROM, Flash, Microcontrollers, PLD, CPLD, FPGA and more.
• Package types: SOIC, PLCC, BGA, MLF, QFN…
• Matching four I/O peripherals to the quad-site gantry increases system throughput

Specifications AP760

Pick & Place System & Physical Specifications

• Placement accuracy: ±0.05m
• Placement repeatability: ±0.03 mm
• Placement force: 95 grams
• Pick-and place method: 4 buses d’aspiration
• Component detection: Vacuum sensor
• Dimension: 180(L) x 120(W) x 165(H) cm;
• Shipping dimension: 227(L) x 165(W) x 205(H) cm;
• Net Weight: 1028 kg
• Shipping Weight: 1328 kg
• Norma : CE Compliant

* Weight may vary with option and sub assembly order

Position recognition system

• X-Y drive system: Servo motor drive system
• X axes resolution: 0.003mm
• Y axes resolution: 0.003mm
• X-Y axes repeatability: 0.030mm
• X-axis maximum velocity: 1600mm/sec
• Y-axis maximum velocity: 1600mm/sec
• Z-theta drive system: Servo motor
• Z axis resolution: 0.001mm
• Z axis repeatability: 0.030mm
• Z axis maximum velocity: 300mm/sec

Alignment System

• CCD FOV: 35mm x 35mm
• Mechanical Precisor: 30mm x 30mm x 4 precisors

Programming System

• Programming sites: 9 sites
• Programming sockets: 1, 2 or 4 per site
• Devices supported: EPROM, EEPROM, Flash,PLD, CPLD,FPGA ,
• Micro-controllers, Anti-Fuse, and more.
• Packages supported: PLCC, TSOP, TSSOP, TQFP, PQFP, SOIC,SSOP, μBGA, CSP and more.
• Model H9800 RAM Buffer: 16 Gbits default
• Communications: USB 2.0

System Software

• GUI: Windows-based HMI
• OS: Microsoft® XP Professional

Operating Requirements

• Input voltage: 220 VAC, Single phase, 3-wires.
• Input line frequency: 50/60 Hz
• Power consumption: 2.5 KVA
• Air pressure: 75 to 95 PSI (0.4 to 0.6Mpa)
• Air flow: 160 liters/min (Peak)
• Operation temperature range:15° to 30°C (59°-86°F)
• Relative humidity: 35-90%

Optional Subsystems

• Tape In / Out: 8mm to 56mm
• Tube In /Out: SOIC8 to PLCC84
• Tray In / Out: JEDEC trays up to 20 plates
• Label Feeder: Hover Davis
• Laser Marker: CO2 (10W)
• 3DX Lead Inspection: 45mm x 45mm