Automated programming system AP 720
Features :
- Universal automatic programmer of IC components
- Proprietary 4-nozzle gantry for handling 4 devices at each programming cycle
- Up to 4 (4 sockets x 4 sites) programming sockets
- Throughput up to 2400 units per hour
- H9800 Universal Programmers with 16 Gbits of RAM on each programmer
- Insertion alignment for pick-up offset by “Precisor” or dual CCD cameras
- I/O : plateaux JEDEC / Barettes /Bobines
- Device support: EPROM, EEPROM, Flash, Microcontrollers, PLD, CPLD, FPGA and more.
- Package types: SOIC, PLCC, BGA, MLF, QFN…
- Matching four I/O peripherals to the quad-site gantry increases system throughput
Specifications AP760
Pick & Place System & Physical Specifications
- Placement accuracy: ±0.05m
- Placement repeatability: ±0.03 mm
- Placement force: 95 grams
- Pick-and place method: 4 vacuum nozzles on Gantry
- Component detection: Vacuum sensor
- Dimension: 155(L) x 120(W) x 165(H) cm;
- Shipping dimension: 197(L) x 165(W) x 205(H) cm;
- Net Weight: 930 kg
- Shipping Weight: 1125 kg
- Norma : CE Compliant
* Weight may vary with option and sub assembly order
Position recognition system
- X-Y drive system: Servo motor drive system
- X axes resolution: 0.003mm
- Y axes resolution: 0.003mm
- X-Y axes repeatability: 0.030mm
- X-axis maximum velocity: 1600mm/sec
- Y-axis maximum velocity: 1600mm/sec
- Z-theta drive system: Servo motor
- Z axis resolution: 0.001mm
- Z axis repeatability: 0.030mm
- Z axis maximum velocity: 300mm/sec
Alignment System
- CCD FOV: 35mm x 35mm
- Mechanical Precisor: 30mm x 30mm x 4 precisors
Programming System
- Programming sites: 9 sites
- Programming sockets: 1, 2 or 4 per site
- Devices supported: EPROM, EEPROM, Flash,PLD, CPLD,FPGA ,
- Micro-controllers, Anti-Fuse, and more.
- Packages supported: PLCC, TSOP, TSSOP, TQFP, PQFP, SOIC,SSOP, μBGA, CSP and more.
- Model H9800 RAM Buffer: 16 Gbits default
- Communications: USB 2.0
System Software
- GUI: Windows-based HMI
- OS: Microsoft® XP Professional
Operating Requirements
- Input voltage: 220 VAC, Single phase, 3-wires.
- Input line frequency: 50/60 Hz
- Power consumption: 2.5 KVA
- Air pressure: 75 to 95 PSI (0.4 to 0.6Mpa)
- Air flow: 160 liters/min (Peak)
- Operation temperature range:15° to 30°C (59°-86°F)
- Relative humidity: 35-90%
Optional Subsystems
- Tape In / Out: 8mm to 56mm
- Tube In /Out: SOIC8 to PLCC84
- Tray In / Out: JEDEC trays up to 20 plates
- Label Feeder: Hover Davis
- Laser Marker: CO2 (10W)
- 3DX Lead Inspection: 45mm x 45mm