Automated programming system AP 600

Video Automated programming system AP 600

Features

• Up to 9-site(36 sockets) for IC device programming
• Throughput up to 800 UPH under zero programming time
•  Downward CCD camera for vision centering and Fast Teach
•  High-speed upward CCD position recognition system
•  H9800 high-speed universal programmer expandable up to 448 pin drivers
•  Fully integrated subsystems for one-piece-flow operation
•  Network-oriented Windows OS JOB management system
•  High-speed USB interface for networking with the programmer
•  Optional automatic tray stacker accommodating up to 20 JEDEC or Non-JEDEC trays
•  Optional subsystems for laser marking and labeling
•  Optional support for tape and tube I/O media
•  Optional 3D inspection
•  Optional ESD ionizer
•  Technologies supports : Flashs, Memories, E-CPLD’s, Microcontrolers, EEPROM’s…
•  Packages supports : SOIC, PLCC, BGA, MLF, QFN…

Specifications

Component Handling System

• Placement accuracy : ±0.10m
• Placement repeatability .03 mm
• Placement force : 95 grams
• Pick-and-place method: 1 buse d’aspiration
• Component detection: Capteur d’aspiration & CCD
• Dimension: 130(L) x 120(W) x 170(H) cm;
• Shipping dimension: 160(L) x 150(W) x 200(H)cm;
• Net Weight: 1000 kg
• Shipping weight: 1250 kg
• Safety: CE compliant

* Weight may vary depending on the options ordered and subsystem

Positioning System

• X-V drive system: servo motor drive system
•  X-axis resolution: 0.001 mm
•  Y-axis resolution: 0.001 mm
•  X-V axes repeatability: 0.010 mm
•  X-axis maximum velocity: 1.50 m/sec
•  Y-axis maximum velocity: 1.50 m/sec

• Z-theta drive system: Servomotor
• Z-axis resolution: 0.001 mm
• Z-axis repeatability: 0.01 mm
• Z-axis maximum velocity: 0.5 m/sec
• Theta-axis resolution: 0.001°
• Theta-axis repeatability: 0.001°
  
  

Positioning Recognition System

• Upward camera: (Standard) component position recognition system for dimension from 0.6cm x 0.6 cm up to 4.0 cm x 4.0 cm
• Downward camera: Socket and I/O position recognition system
• local fiducials: Socket position reference coordinate system

Programming System

• Programming sites: 9 sites (up to 36 sockets)
• Type: H9800 high-speed univetsal programmer on each site
• Pin drivers: 112 standard, extendable to 448 per site
• Devices supported: EPROM, EEPROM, Rash,microcontroller, PLO, CPLO, Anlifuse, FPGA, and more
• Packages supported, PLCC, TSOP, T~ TQFP, PQFP, SOIC, SSOp' uBGA, CSp' and more
• File formats supported: Intel Hex, Microchip INHX, Tektronix, Hex, Motorola S, Signetics Hex, Extended Tekhex, HP 64000, Absolute, Spectrum, TI SOSMAC, ASCII Hex, ASCI1 Oct, ASCII Binary, Formatted Binary, Binary, JEDEC, POF, 010, AFM, JAM, STAPl, and LOF
• RAM buffer: expandable up to 16 Gbits
• Communication: USB link
• Safety: CE compliant

System Software

• User interface: Windows-based HMI
• Operating system: Windows 2000

Operating Requirements

•  Input voltage: AC200/220/240V, Single-phase, 3-wires
•  Input line frequency: 50/60 Hz
•  Power consumption: 1.2 KVA
•  Air pressure: 75-95 PSI
•  Air flow: 120 liters per minute(Max)
•  Operating temperature range: 15-30°C
•  Relative humidity: 35-90%

Optional subsystem

• AutoTray Stacker
• Tape and reel input/output media
• Tube input/output media
• labeler
• Laser Co² / Yag