Automated programming system AP 700

Features

• 4-site (expandabte up to 16 sockets) pick-and-ptace automated programming system
• Throughput up to 800 UPH
• Downward CCD camera for vision centering and Auto Teach
• High-speed upward camera for pfacement alignment
• High-speed H9800 universat programmers (112 up to 448 pin driver)
• Fully integrated subsystems wilh network-oriented JOB software
• Network-oriented JOB Windows software wilh USB interface
• Optionat aulo tray stacker accommodating up to 20 JEDEC trays.
• Availabte custom tray stacker for non-JEDEC trays
• Optionat I/O media for tube and tape packages
• Available gang socket boards
• Technologies supports : Flashs, Memories, E-CPLD’s, Microcontrolers, EEPROM’s…
• Packages supports : SOIC, PLCC, BGA, MLF, QFN…

Specifications

Component Handling System

• Throughput: 800 UPH
• Placement accuracy: : 0.05 mm
• Placement repeatability: 0.03 mm
• Placement force: 95 grams
• Pick-and-place method: single vacuum nozzles
• Component detection: vacuum sensor
• Dimensions: 125(L) x 90(W) x 165(H) cm
• Shipping dimensions: 145(L) x 105(W) x 185(H) cm
• Net weight: 580 kg
• Shipping weight: 700 kg
• Safety: CE compliant

* Weight may vary depending on the options ordered and subsystem

Positioning System

•  X-V drive system: servo motor drive system
•  X-axis resolution: 0.001 mm
•  Y-axis resolution: 0.001 mm
•  X-V axes repeatability: 0.010 mm
•  X-axis maximum velocity: 1.60 m/sec
•  Y-axis maximum velocity: 1.60 m/sec
•  Z-theta drive system: Servomotor
•  Z-axis resolution: 0.010 mm
•  Z-axis repeatability: 0.020 mm
•  Z-axis maximum velocity: 0.500 m/sec
•  Theta-axis resolution: 0.036°
•  Theta-axis repeatability: 0.072°

Positioning Recognition System

• Upward camera: (Standard) component position recognition system for dimension up to 4.0 cm x 4.0 cm
• Downward camera: Socket and I/O position recognition system
• local fiducials: Socket position reference coordinate system

Programming System

• Programming sites: 4 sites (up to 16 sockets)
• Type: H9800 high-speed univetsal programmer on each site
• Pin drivers: 112 standard, extendable to 448 per site
• Devices supported: EPROM, EEPROM, Flash,microcontroller, PLD, CPLD, Antifuse, FPGA, and more
• Packages supported, PLCC, TSOP, T~ TQFP, POFP, SOIC, SSOP, µBGA, CSp' and more
• File formats supported: Intel Hex, Microchip INHX, Tektronix, Hex, Motorola S, Signetics Hex, Extended Tekhex, HP 64000, Absolute, Spectrum, TI SOSMAC, ASCII Hex, ASCI1 Oct, ASCII Binary, Formatted Binary, Binary, JEDEC, POF, 010, AFM, JAM, STAPL, and LOF
• RAM buffer: 512 Mbits standard, expandable up to 4 Gbits
• Communication: USB link
• Safety: CE compliant

System Software

• User interface: Windows-based HMI
• Operating system: Windows 2000

Operating Requirements

•  Input voltage: AC200/220/240V, Single-phase, 3-wires
•  Input line frequency: 50/60 Hz
•  Power consumption: 0.8 KVA
•  Air pressure: 75-95 PSI
•  Air flow: 60 liters per minute(Max)
•  Operating temperature range: 15-30°C
•  Relative humidity: 35-90%

Optional subsystem

• AutoTray Stacker
• Tape and reel input/output media
• Tube input/output media
• labeler
• Laser Co² / Yag